Manufacturer and Exporter Sacffolding

Translate this website:

Manufacturers and Exporters Bicycles, Bicycles Parts, Moped Parts, Hand Tool, Wrought Iron Comp, Diesel Engine, Scaffolding, Conveyor/V-Belting, Fasteners, Hinges, Candy etc.

Date :

kmk manufacture complete bicycle and expoter

KMK-SF-01

ADJUSTABLE TELESCOPIC PROPS

Props provide the ideal and most economic method of support for all kind of form work, slabs, beams, wall & columns. They are also invaluable for a wide variety of applications in general building construction and repair work.

Our props and struts are manufactured from high quality material with painted as well as galvanized finish for long life and are highly resistant to site wear and tear.

Our props and struts can be used on all types of building construction or for any type of use where an adjustable load-bearing member is required.

The high tensile steel pin is located through a slot in the outer section and a hole on the inner section for coarse adjustable. The cast collar located below the pin gives fine adjustable for leveling and striking.

Our Props are available in both rolled thread

(1) STANDARD PROPS INTERNATIONAL DESIGN)

Inner

48.3 mm x 3.2 mm

Outer

60.3 mm x 3.6 mm

Top/Bottom Plates

150 x 150 x 6 mm

Minimum Characteristic Strength
Safe Load

Size

Closed

Extended

Closed

Extended

Appx. Wt.

1.04

1.82

3780 KG

3041 KG

11 KG

1.75

3.12

3780 KG

2010 KG

16.70 KG

1.98

3.35

3780 KG

1816 KG

18.40 KG

2.59

3.95

3058 KG

1583 KG

20.20 KG

3.20

4.87

2666KG

950 KG

24.20 KG

(2) Heavy duty props Inner: 48.3mm x 4.0mm, Outer 60.3mm x 4.5, Top / Bottom plate 150mm x
150mm x 6mm / 8mm

(3) Props according to customer's requirement also available on request.

ADJUSTABLE SCREW JACKS

KMK-SF-02

KMK-SF-03

ADJUSTABLE BASE JACK

STANDARD SIZE:

32 mm dia, 225 mm, adjustment

36 mm dia, 350 mm, adjustment

36 mm dia, 450 mm, adjustment

ADJUSTABLE FORK HEAD/STIRRUP HEAD JACK

STANDARD SIZE:

32 mm dia, 225 mm, adjustment

36 mm dia, 350 mm, adjustment

36 mm dia, 450 mm, adjustment

Base Jacks are manufactured from a rolled thread tubular process and rolled thread solid process, thread rolling offers a superior finish achieved by the burnishing action of the rolls with no tool marks or tearing.

BASE PLATE
Sizes: Plate Size 150 mm x 150 mm x 6 mm with spigots / pins for fixing with 40 N.B Scaffolding Pipe.

JACK NUT
Sizes: 32 mm, 36 mm & 40 mm with ACME Thread.